The HK Fiber laser plate processing line-up is widely recognized for its exceptional efficiency and unmatched precision, solidifying its position as a leading option within the manufacturing industry due to its superior performance and reliability.
Designed to handle different plate sizes and thicknesses, our machines offer flexibility and adaptability, allowing you to maintain the highest quality standards while minimizing waste and maximizing output.
Laser and plasma cutting technology
Automated drilling and forming capabilities
High adaptability to different plate sizes
Enhanced precision for intricate designs
The FS3015 Fiber Laser Series, nicknamed the ‘Falcon’ series, was developed after listening to our customers who wanted a low-cost fiber laser machine to meet their budget, but didn’t want to compromise on cut quality, machine performance or functionality. HK zeroed in on customer feed-back and developed a machine that is an investment game changer with a cutting edge fiber resonator and Siemens CNC control.
The most entry level model in the series is the 2.5kW variant with standard nLight Cutting Head. The 4kW, 5kW, and 8kW variants all feature nLights groundbreaking new ‘Corona’ cutting head technology which allows operators to vary beam density at the head for a variety of materials and applications.
• 2.5kW, 4kW Corona, 5kW Corona, & 8kW Corona
• 5′ X 10′ working area with dual power shuttle table
• Flying-optics 3-axis motion system with synchronized dual-servo motors gantry
• HK controller powered by SIEMENS CNC platform
• Rack & pinion drive system
• Full enclosure for the work table complied with Laser safety class IV
• Short axis gantry platform
• Autofocus control non-contact fiber cutting head
• Beam delivery fiber cable with QBH connection
• Laser chiller
• Dust Collector
• Automation Ready
• Built-in structure for fiber laser and electrical cabinet
• Two programmable ports for assist gas (Oxygen, HP Nitrogen)
• 480VAC Standard
Enhance your cutting capability up to 60” x 160” sheet size.
When it comes to manufacturing, efficiency is the key to success. One of the many ways to be efficient in the production process is material utilization. It is crucial to use up as much sheet material as possible and minimize the amount of scrap. For most cases, the larger the sheet size, the more efficient the material utilization is. Listed below are standard sheet metal sizes provided in U.S. It is reported that the material utilization for a 60”x144” sheet is approximately 10% higher than 60”x120” size sheet or smaller.
When it comes for the need to acquire an oversize laser machine in order to cut oversized parts, the main demand is not for expanded width, but for the length, which is mostly up to 144 inches. It is no longer necessary to acquire an oversize massive laser machine just to cut longer parts.
Auto Focus Cutting Head
Process monitoring system to monitor the temperatures of all optics, nozzle and electronics at the cutting head
Perfect sealing between motorized linear guide and optics chamber to prevent any possible contamination
Upper protective window to the collimator, minimizing the risk of contamination of the collimator
Easy beam centering check by potable beam center camera
HK Controller
High speed controller with Window-based 64MB RAM and high capacity SSD hard disk drive
21” flat touch screen with user-friendly intuitive HMI design
Data communication by USB or Ethernet LAN Built-in cutting database library for various materials
Easy access to check up the status for laser resonator and cutting head
Beam shaping Technology
Unlike the conventional beam size variation at the cutting head by using extra zoom lenses, HK’s revolutionary solution for beam shaping is that the mode and profile of the fiber laser beam is variable at the laser resonator. This technology eliminates the demand to have a complicated cutting head design for beam shaping.
The diameter of laser beam from 0.125mm to 0.350mm
No motorized zoom optics at the cutting head
No free-space optics coupling at the beam delivery cable
100% power available from a single laser source
The HK Royce was designed to the highest speed, power and performance in its class. Royce is designed to process the gauge sheet metal with ultra high productivity and cut thick stainless / aluminum plate with a shiny clean cut edge.
Maximum fiber laser power up to 12kW and beyond which enable to cut over 1” thick stainless steel or aluminum plate or cut mid-range thick plates with ultra-high speeds. For examples, 550ipm for 0.25” or 190ipm for 0.5” for Stainless.
The HK Royce has an open table structure which have two doors accessible to the cutting table, one from the front and one from the side. That way, the machine is much more accessible to the table for casual trouble-shooting and parts handling.
Royce adopts the innovative and revolutionary flying-optics structure design to quantum-leap the speed and productivity of the system along with great gantry stability in high dynamics environment. Special gantry design and lower CGP (Center Gravity Point) are the keys for this innovative technology.
Thanks to the above features, High JERK value is achieved for higher da/dt, as opposed to G value which is dv/dt. It rapidly accelerates acceleration instead of velocity.
The fiber laser, electrical cabinet and gas control system are all built-in as part of one-body system so the time for installation and set-up is reduced, and the floor dimension is much more compact than the competitors.
The new version HK HMI control application based on Siemens SINUMETIK 840D brings more user-friendly and innovative features to make the system even more competitive in terms of productivity, convenience and remote-monitoring.
The width of main body: RS 2190mm(86”) PS/FS 3300mm(130”) -> 34% compact
The width of entire system: RS 3818mm(150”) PS/FS 5073mm(200”) -> 25% compact
Total dimension required for installation: 20% compact, compared to PS/FS model
Main body fits to 40’ container with side panels pre-assembled
Electrical cabinet & laser built-in -> very easy to install & set up -> complete in a week
The all new FL3015 corona fiber laser system is the latest high quality fiber laser produced by HK. It features a cutting carriage with dual servo motors and additional frames to prevent whipping with a brand new Laser Mech auto focus fiber cutting head.
The FL3015 Corona has a wide open side door for flexible cutting of various sheet sizes with a rotary axis as an option for tube cutting.
High-Stiff Main Frame that Minimizes Vibration
Dynamic Motion Control
Optimal Thick Plate Cutting by SmartCut
No Need for Separate Oscillator Room / Thermo-Hygrostat Mounted
Cutting of High-Reflective & High-Level Processing Material
Ultralight and High-Stiff Cutting Bridge
Tube Cutting (Optional)
Quick Piercing that Shortens Piercing Time and Improves Quality
High Precision & High Quality Cutting in Ultra Thin Materials (0.1mm – 0.5mm)
No Alignment / No Overhaul / No Mirro
The HK PS Series Fiber is our Premium Model of High Energy Fiber Laser Cutting Technology. It excels in both ultra-speed cutting and nonferrous metal cutting, and stable cutting on whole material conditions from thin plate to thick plate.
Models include:
PS3015 – 5′ x 10′ (3kW, 4kW, 6kW, 10kW)
PS4020 – 6.5′ x 13′ (4kW, 6kW, 10kW)
PS6025 – 8′ x 20′ (4kW, 6kW, 10kW)
PS8025 – 8′ x 26′ (4kW, 6kW, 10kW)
High-Stiff Main Frame that Minimizes Vibration
Dynamic Motion Control
Ultralight and High-Stiff Cutting Bridge
Optimal Thick Plate Cutting by Smart-Cut
Quick Piercing that Shortens Piercing Time and Improves Quality
Maximum Work Area of 8m x 2.5m
High Precision & High Quality Cutting in Ultra Thin Materials (0.1mm – 0.5mm)
Cutting of High-Reflective & High-Level Processing Material
No Alignment / No Overhaul / No Mirror
Introducing the HK Laser Omega HD Series – the pinnacle of precision and power in laser technology. Engineered for professionals, this state-of-the-art machine combines cutting-edge laser capabilities with user-friendly operation.
Ideal for a wide range of applications, from intricate engraving to high-volume cutting, the HK Omega Laser ensures unparalleled accuracy and speed. Its robust design guarantees durability and reliability, while advanced safety features provide peace of mind.
Experience the future of laser technology with the HK Laser Omega HD Series – where innovation meets performance.
High Precision: Achieve detailed and accurate cuts with a positioning accuracy of ±0.01 mm, perfect for both intricate engravings and precise cuts.
Versatile Power Options: Choose from a range of power options (60W to 150W) to suit various materials and cutting requirements.
Large Cutting Area: Available in multiple sizes to accommodate projects of all scales, from small engravings to large-format cuts.
Fast Operation: With engraving speeds up to 1000 mm/s and cutting speeds up to 600 mm/s, you can complete projects quickly and efficiently.
Advanced Cooling System: Efficient water-cooled or air-cooled systems ensure stable performance and longevity of the laser tube.
User-Friendly Control: The DSP control system allows for intuitive operation and precise control over laser settings.
Wide File Compatibility: Supports a variety of file formats, including AI, BMP, PLT, DXF, DST, DWG, LAS, and DXP, for seamless integration with popular design software.
Enhanced Connectivity: Easily connect via USB or Ethernet for smooth data transfer and control.
Robust Safety Features: Includes a laser shield, emergency stop, and interlock system to ensure safe operation.
Additional Functionalities: Features like a red dot pointer for precise positioning, auto-focus for optimal cutting height, and compatibility with rotary attachments for cylindrical objects.
Upgrade your production capabilities with the HK Laser Omega HD Series – designed for those who demand the best in precision, speed, and reliability.
Fill out the form below and a representative will be in touch shortly.
